Publications
Publications by Research Area
Publications by Division
X Author: Iván Dario Bedoya
2014
Saxena, Samveg, Nihar Shah, Iván Dario Bedoya, and Amol A Phadke."Understanding Optimal Engine Operating Strategies for Gasoline-Fueled HCCI Engines using Crank-Angle Resolved Exergy Analysis."Applied Energy
114 (2014) 155-163. DOI
2013
Saxena, Samveg, and Iván Dario Bedoya."Fundamental Phenomena affecting Low Temperature Combustion and HCCI Engines, High Load Limits and Strategies for Extending these Limits, Progress in Energy & Combustion Science."
(2013).
Bedoya, Iván Dario, Samveg Saxena, Francisco J Cadavid, and Robert W Dibble."Numerical Analysis of Biogas Composition Effects on Combustion Parameters and Emissions in Biogas Fueled HCCI Engines for Power Generation."ASME Journal of Engineering for Gas Turbines and Power
135.7 (2013).
2012
Saxena, Samveg, Iván Dario Bedoya, Nihar Shah, and Amol A Phadke."Understanding Loss Mechanisms and Efficiency Improvement Options for HCCI Engines Using Detailed Exergy Analysis."
(2012). DOI
Bedoya, Iván Dario, Francisco J Cadavid, Samveg Saxena, Robert W Dibble, Salvador Aceves, and Daniel Flowers."A Sequential Chemical Kinetics-CFD-Chemical Kinetics Methodology to Predict HCCI Combustion and Main Emissions."SAE 2012 World Congress & Exhibition, April 24, 2012
(2012). DOI
2011
Bedoya, Iván Dario, Samveg Saxena, Francisco J Cadavid, Robert W Dibble, and Martin Wissink."Experimental evaluation of strategies to increase the operation range of a biogas HCCI engine for power generation."Applied Energy
97 (2011) 618-629. DOI
Bedoya, Iván Dario, Samveg Saxena, Francisco J Cadavid, Robert W Dibble, and Martin Wissink."Experimental study of biogas combustion characteristics and emissions in a HCCI engine for power generation."
1.53 (2011) 154-162.
Bedoya, Iván Dario, Samveg Saxena, Francisco J Cadavid, and Robert W Dibble."Exploring Strategies for Reducing High Inlet Temperature Requirements and Allowing Optimal Operating Conditions in a Biogas Fueled HCCI Engine for Power Generation."ASME Journal of Engineering for Gas Turbines and Power
7.134 (2011).