Performance of Electronic Ballasts and Other New Lighting Equipment
Publication Type
Date Published
Authors
Abstract
This study discusses parameters for selecting the most suitable auxiliary lighting device to operate and control gas-discharge lamps. The devices tested in this study include solid-state, fluorescent, and high-intensity discharge (HID) ballasts; current limiters; and dynamic lighting controls. They have been evaluated when operating the standard, 40-W, F-40, T-12, rapid-start, cool-white fluorescent lamps.
Solid-state ballast performance varied widely, from 68 to 79 lumens per watt (1m/W) in efficacy, and from 0.83 to 0.98 in ballast factor. System efficacy was measured at up to 26% higher than standard core-coil ballast efficacy.
Current limiters used with standard core-coil ballasts reduce light output and input power by 30 to 50% and may be suitable as retrofit devices to reduce light in overilluminated spaces. In operation a t a constant lamp wall temperature, these devices either maintain or reduce system efficacy.
Dynamic lighting controls (which vary the light output) condition the power to standard core-coil fluorescent ballasts, and low-voltage-type controls alter the oscillating circuit of solid-state ballasts. Power conditioning systems are generally designed to operate many ballasts and most can dim lamps to 50% of full light output. The solid-state ballasts control individual lamps and can dim them to 10% of full light output.